跳到步骤＃1
由 Nicholas Abate — 编辑
编辑已通过 由 Nicholas Abate
- 之前
- 之后
- 不变
步骤行
| + | [* icon_note] Make sure to place the camera on a piece of material or the Magnetic Project Mat to avoid damaging the camera while performing any repairs. |
|---|---|
| + | [* black] Place the camera upside down and position it to where the back of the camera is visible. |
| + | [* black] From this position locate the latch on the battery door positioned on the left side of the camera. Push upwards on the door latch to release the battery door. |
| + | [* black] Pull to the right on the orange tab to release the primary battery from its position. |
| + | [* black] To remove the secondary battery, reposition the camera to where the display screen is facing upwards. |
| + | [* red] Place finger inside the empty battery compartment and pull away from the camera on the ridged battery tab. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加