跳到步骤＃2
由 Jack Freeman — 编辑
编辑已通过 由 Justin Ogihara
- 之前
- 之后
- 不变
步骤行
| - | [* black] |
|---|---|
| + | [* black] Use Phillips #000 Screwdriver to remove the case holding screws, remove the 4 screws that hold the back panel. |
| [* icon_caution] Apply gentle pressure when undoing the screws to preserve the condition of screw heads for future repairs or servicing. | |
| [* icon_note] It is important to manage all the extracted screws in a manner that will allow you to quickly place them where they belong during the reassembly process. You can take pictures of each step to memorize the screw placement, or purchase a magnetic pad and section the screws on it. |