跳到步骤＃2
由 Kristen Gismondi — 编辑
编辑已通过 由 Kristen Gismondi
- 之前
- 之后
- 不变
步骤行
| - | [* black] Push the flat edge of a metal spudger between the seal and the toothbrush body and pry it up. Do this on each side until the seal is partially sticking out on all sides. |
|---|---|
| + | [* black] Push the flat edge of a nylon or metal spudger between the seal and the toothbrush body and pry it up. Do this on each side until the seal is partially sticking out on all sides. |