跳到步骤＃3
由 Adam Jones — 编辑
编辑已通过 由 Adam Jones
- 之前
- 之后
- 不变
步骤行
| - | [* black] Using the spudger, move around the casing, carefully separating the rear housing from the camera assembly. |
|---|---|
| - | [* icon_caution] Be sure to only apply pressure to the casing panels and not the sensitive internal electronics. |
| - | [* black] Once the rear housing is separated, the settings buttons will be accessible for replacement. |
| + | [* black] Using the spudger, begin prying the case from the device, carefully separating the rear housing from the camera assembly. Once the rear housing is separated, the camera's physical buttons will be accessible for replacement. |
| + | [* icon_caution] Be sure to only apply pressure to the casing panels, not internal electronics. Doing so can damage the internal components of the camera. |