跳到步骤＃5
由 Angela Penaherrera — 编辑
编辑已通过 由 Angela Penaherrera
- 之前
- 之后
- 不变
步骤行
| - | [* black] With the help of a syringe or anything that can |
|---|---|
| + | [* black] With the help of a syringe or anything that can suck liquid, clean the remaining ink from the tube. |
| [* black] I also went ahead and cleared the pad from as much ink as I could, it can buy you a bit more life span to the pad if you are in a hurry to print and not have the replacement items for this hack. | |
| [* icon_note] I did not have a syringe at the time and used a desolder pump, takes way longer though. |