跳到步骤＃1
由 Andres Echeverria — 编辑
- 之前
- 之后
- 不变
步骤行
| [* black] Insert a small prying tool under the faceplate. | |
| - | [* black] Pry upwards with some force. |
| - | [* black] There are three retaining clips on each side of the cell phone. |
| - | [* black] Pull up evenly on the faceplate using a good deal of force. |
| + | [* black] Separate the faceplate from main body by twisting the prying tool with some force. |
| + | [* black] The faceplate is held by three gripping clips, so pry evenly on both sides of phone. |