跳到步骤＃2
由 Joshua Harriger — 编辑
编辑已通过 由 Joshua Harriger
- 之前
- 之后
- 不变
步骤行
| + | [* black] Twist the exposed ends of the wires so that they stay together. |
|---|---|
| + | [* black] Push the wire cap onto the exposed ends and twist until it is tight. |
| + | [* black] Repeat this process for both groups of wires. |
| + | [* icon_caution] Do not attempt to power on the device without the wire caps on or mix wires between the bundles. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加