跳到这一步
由 Carolyn Teng — 编辑
编辑已通过 由 Carolyn Teng
- 之前
- 之后
- 不变
步骤行
| + | [* black] Allow a minute or so for the rubbing alcohol to evaporate. |
|---|---|
| + | [* black] Once the surfaces are completely dry, squeeze a small amount of thermal paste onto the components. |
| + | [* icon_caution] Try to avoid getting the thermal paste onto the component board. |
| + | [* icon_note] You can use adhesive thermal pads instead of thermal paste. |