跳到步骤＃2
由 Andrew Bookholt — 编辑
- 之前
- 之后
- 不变
步骤行
| [* black] Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on the following three ZIF sockets: | |
| [* red] Lower touchscreen cable | |
| [* orange] Lower LCD cable | |
| [* yellow] Power board cable | |
| - | [* icon_caution] Be sure you are prying up on the hinged retaining flaps, not the sockets themselves. |
| + | [* icon_caution] Be sure you are prying up on the hinged retaining flaps, ***not*** the sockets themselves. |
| [* black] After flipping up the locking tabs on all three sockets, use your fingers or a pair of tweezers to gently pull the cables straight out of their sockets. |