跳到步骤＃7
由 Kaitlynn Ortiz — 编辑
编辑已通过 由 Kaitlynn Ortiz
- 之前
- 之后
- 不变
步骤行
| [title] LCD Screen Removal from Mount | |
| [* black] Begin by inserting the tip of the blue plastic opening tool between the LCD Screen and the Mount to unsnap the metal tabs. | |
| - | [* black] Use the flat end of the |
| - | [* icon_caution] |
| + | [* black] Use the flat end of the Spudger to get underneath the LCD screen to break apart the glue that is attaching the LCD Screen to the Mount. |
| + | [* icon_caution] Avoid scraping against the power wires and ribbon wire. It may cause the ribbon wire to rip or detach the power wires. |
| [* black] Once you have separated the the glue, carefully pull out the LCD Screen from the mount. | |
| - | [* icon_note] Pay |
| + | [* icon_note] Pay attention to wires and ribbon wire as you pull the LCD screen out of the mount. Make sure that you slide the ribbon wire through the slot to separate the LCD screen and Mount. |