跳到步骤＃1
由 Evan Roberts — 编辑
编辑已通过 由 Evan Roberts
- 之前
- 之后
- 不变
步骤行
| [title] Eyepiece | |
| [* icon_note] Use a Phillips #000 Precision Screwdriver for all of the following steps. | |
| - | [* red] |
| - | [* orange] |
| - | [* yellow] |
| - | [* green] |
| + | [* red] On the bottom side of the camera, unscrew both 4.5 mm screws holding the bottom into place, per image 1. |
| + | [* orange] On the right side of the camera, unscrew both 4.5 mm screws holding the side into place, per image 2. |
| + | [* yellow] On the right side of the camera, unscrew the 4.5 mm screw underneath the A/V flap, per image 2. |
| + | [* green] On the top side of the camera, unscrew the 4.0 mm screw on the left-side wrist strap loop, per image 3. |