跳到步骤＃7
由 Elizabeth Kamine — 编辑
编辑已通过 由 Elizabeth Kamine
- 之前
- 之后
- 不变
步骤行
| - | [* red] Using a Phillips #000 Precision Screw Driver, remove the three 3.0 mm screws from the motherboard. |
|---|---|
| - | [* black] Carefully unlatch each safety that holds the five data transfer ribbons in place and remove each ribbon from its socket. |
| + | [* red] Using a Phillips #000 Precision Screwdriver, remove the three 3.0 mm screws from the motherboard. |
| + | [* black] Using your finger, gently release the safety latches that holds the five ribbons in place. |
| + | [* black] Slide the five ribbons out from their sockets. |