Digitac Jazz Ultratab C725 Battery Replacement 步骤 #2 历史记录

	[* black] Flip your device so that the long side without the buttons is facing you.
-	[* black] Insert the ~~Plastic Opening Tool~~ between the silver back plate and the screen ~~about 1 inch from~~ corner of the device on either side.
-	[* black] ~~Jimmy~~ the ~~Plastic Opening Tool until~~ the screen ~~unsnaps~~ from the back plate.
-	[* black] ~~Work your way down the edge of the device, popping out all locations where~~ the screen ~~snaps into~~ the ~~silver~~ back plate.
-	[* black] ~~Go around~~ the ~~corners with~~ the ~~Plastic Opening Tool and unsnap additional snap-in locations as necessary~~.
-	[* icon_caution] ~~Once~~ the screen is loose, pull it towards you ~~then lift~~ it ~~off~~ to prevent damage to the buttons ~~on the other side of the device~~.
+	[* black] Insert the plastic opening tool between the silver back plate and the screen. From the corner of the device on either side, pry the seam of the device about 1 inch.
+	[* black] With the plastic opening tool, pry the screen apart from the back plate.
+	[* black] Keep prying the screen apart from the back plate until they are separated.
+	[* black] With the plastic opening tool, if necessary, pry part the remaining seams of the device.
+	[* icon_caution] After the screen is loose, pull the screen towards you. Lift it to prevent damage to the buttons.