跳到步骤＃2
由 Savannah Brazzeal — 编辑
编辑已通过 由 Savannah Brazzeal
- 之前
- 之后
- 不变
步骤行
| [* black] Flip your device so that the long side without the buttons is facing you. | |
| [* black] Insert the Plastic Opening Tool between the silver back plate and the screen about 1 inch from corner of the device on either side. | |
| [* black] Jimmy the Plastic Opening Tool until the screen unsnaps from the back plate. | |
| - | [* black] Work your way down the edge of the device, popping out all 4 locations where the screen snaps |
| + | [* black] Work your way down the edge of the device, popping out all 4 locations where the screen snaps into the silver back plate. |
| [* black] Go around the corners with the Plastic Opening Tool and unsnap additional snap-in locations as necessary. | |
| - | [* icon_caution] Once the screen loose, pull it towards you then lift it off to prevent damage to the buttons on the other side of the device. |
| + | [* icon_caution] Once the screen is loose, pull it towards you then lift it off to prevent damage to the buttons on the other side of the device. |