Digitac Jazz Ultratab C725 Battery Replacement 步骤 #2 历史记录

	[title] Removing the back plate
	[* black] Flip your device so that the long side without the buttons is facing you.
	[* black] Insert the plastic opening tool between the silver back plate and the screen about 1 inch from corner of the device on either side.
-	[* black] ~~Work~~ the plastic opening tool ~~inside and attempt to pop~~ the screen ~~out~~.
+	[* black] Jimmy the plastic opening tool until the screen unsnaps from the back plate.
	[* black] Work your way down the edge of the device, popping out all 4 locations where the screen snaps in to the silver back plate.
-	[* black] ~~Your device may still be held together pretty well. If this is the case, round~~ the corners with the plastic opening tool and unsnap ~~the~~ snap-in locations as necessary.
+	[* black] Go around the corners with the plastic opening tool and unsnap additional snap-in locations as necessary.
	[* black] Once the screen loose, pull it towards you then lift it off to prevent damage to the buttons on the other side of the device.