| + | [title] Removing the back plate |
|---|
| + | [* black] Flip your device so that the long side without the buttons is facing you. |
|---|
| + | [* black] Insert the plastic opening tool between the silver back plate and the screen about 1 inch from corner of the device on either side. |
|---|
| + | [* black] Work the plastic opening tool inside and attempt to pop the screen out. |
|---|
| + | [* black] Work your way down the edge of the device, popping out all 4 locations where the screen snaps in to the silver back plate. |
|---|
| + | [* black] Your device may still be held together pretty well. If this is the case, round the corners with the plastic opening tool and unsnap the snap-in locations as necessary. |
|---|
| + | [* black] Once the screen loose, pull it towards you then lift it off to prevent damage to the buttons on the other side of the device. |
|---|