| - | [* black] Locate the four screws holding the silver back plate and the screen together (3.5 mm long with 2 mm head width). There are 2 screws on the top and another 2 screws on the bottom. |
|---|
| - | [* black] Using the Phillips #00 Screwdriver, remove all 4 screws holding the device together. |
|---|
| + | [* black] Locate the four 3.5 mm Phillips head screws holding the silver back plate and the screen together. There are 2 screws on the top and another 2 screws on the bottom. |
|---|
| + | [* black] Using the Phillips #00 Screwdriver, remove all 4 screws. |
|---|