跳到步骤＃46
由 Sam Goldheart — 编辑
编辑已通过 由 Sam Goldheart
- 之前
- 之后
- 不变
步骤行
| + | [* black] Lift the logic board by the camera end and gently pull the Lightning connector housing out of the rear case. |
|---|---|
| + | [* black] Remove the logic board from the iPad. |
| + | [* icon_caution] If there is any resistance from the Lighting port cable stop pulling to avoid ripping the cable. Slide the opening pick under the length of the cable again to fully free it from the rear case. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加