跳到步骤＃27
由 Sam Goldheart — 编辑
编辑已通过 由 Sam Goldheart
- 之前
- 之后
- 不变
步骤行
| + | [* icon_caution] Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. |
|---|---|
| + | [* black] Flip the iPad back over and insert a plastic card between the logic board side, speaker end of the battery and the rear case. |
| + | [* icon_note] If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加