跳到步骤＃9
由 Pejmon — 编辑
编辑被拒绝 由 Walter Galan
- 之前
- 之后
- 不变
步骤行
| [* black] Remove the following four screws: | |
| - | [* red] Two 3.5 mm Phillips screws |
| + | [* red] Two 3.5 mm Phillips or Torx screws |
| [* orange] Two 1.6 mm Phillips screws | |
| [* black] Remove both connector shields from the logic board. |