跳到步骤＃3
由 Jeff Suovanen — 编辑
编辑已通过 由 Jeff Suovanen
- 之前
- 之后
- 不变
步骤行
| + | [* icon_caution] Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end. |
|---|---|
| + | [* black] Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers. |
| + | [* black] Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case. |
| + | [* icon_caution] Be gentle and keep an eye on the LCD cables as you flip the display over. |
| + | [* black] Lay the LCD on its face to allow access to the display cables. |
| + | [* icon_note] Set the LCD down on a soft, clean, lint-free surface. |