跳转到主内容

跳到步骤#4

Angel编辑

编辑已通过 由 Mariana Roca

之前
之后
不变

步骤行

[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
-[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
+[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to isolate the battery.
[* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.