跳到步骤＃3
由 Jeff Suovanen — 编辑
编辑已通过 由 Jeff Suovanen
- 之前
- 之后
- 不变
步骤行
| - | [* black] Use the flat end of a spudger to carefully pop the two digitizer cable connectors straight up from their sockets. |
|---|---|
| - | [* icon_caution] To avoid damaging your iPad, pry only on the connectors |
| + | [* black] Use the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets. |
| + | [* icon_caution] To avoid damaging your iPad, pry only on the connectors themselves, ***not*** on the socket on the logic board. |