跳转到主内容

跳到步骤#3

Angelo编辑

编辑已通过 由 Angelo

之前
之后
不变

步骤行

-[* red] Disconnect the blue wire connecting the logic board to the LED screen
-[* yellow] Disconnect the orange wire using a spudger while pushing out horizontally
-[* blue] Disconnect the red capped wire from the logic board
-[* black] Lift the logic board and lens (still connected) out of the back case
+[* red] Disconnect the blue wire connecting the logic board to the LCD screen.
+[* yellow] Disconnect the orange wire using a spudger while pushing out horizontally.
+[* blue] Disconnect the red capped wire from the logic board.
+[* black] Lift the logic board and lens (still connected) out of the back case.