| - | [* red] Remove the five identical 3.5 mm screws from the bottom of the camera |
|---|
| - | [* black] Remove the grey plastic piece that was held in place with the five screws by gently prying the faceplate up (Note: do not pull hard, there are two wires connecting the faceplate to the logic board) |
|---|
| + | [* red] Remove the five 3.5 mm screws that are at the bottom of the camera. |
|---|
| + | [* black] Remove the grey plastic piece, which was held in place with the five screws, by gently prying the front cover. Do not apply too much force because two wires still connect the front cover to the logic board. |
|---|