跳到步骤＃1
由 Andrew Optimus Goldheart — 编辑
编辑已通过 由 Andrew Optimus Goldheart
- 之前
- 之后
- 不变
步骤行
| + | [* icon_note] Remove any foam tape from the top of the GPS cable ZIF connector. |
|---|---|
| [* black] Use the tip of a spudger to flip the retaining tab on the ZIF connector to release the GPS cable. | |
| [* icon_note] Do not attempt to disconnect this cable yet—it will come free when you remove the upper component board. |