跳到步骤＃6
由 richard guenther — 编辑
- 之前
- 之后
- 不变
步骤行
| [* black] Remove the five identical 3.5 mm screws from the bottom of the camera | |
| - | [* black] Remove the grey plastic piece that was held in place with the five screws by gently prying the faceplate up (Note: do not pull hard, there are two wires connecting the faceplate to the logic board) |
| + | [* black] Remove the grey plastic piece that was held in place with the five screws by gently prying the faceplate up |
| + | [* icon_note] Note: do not pull hard, there are two wires connecting the faceplate to the logic board |