跳到步骤＃1
步骤行
| + | [* red] Use a Phillips #0 screwdriver to remove the eleven 6.9 mm screws that secure the lower case. |
|---|---|
| + | [* icon_caution] Make sure all the screws on this side get taken out because there could be a*** label ***or ***warranty sticker*** covering up a screw that might be missed. |
| + | [* black] Insert an opening pick into the gap between the lower case and chassis. |
| + | [* black] Slide the pick around the entire perimeter of the laptop until the lower case fully releases. |
| + | [* black] Remove the lower case. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加