跳到步骤＃3
由 emil haurum — 编辑
编辑已通过 由 emil haurum
- 之前
- 之后
- 不变
步骤行
| + | [* black] Pull the metal edge completly off. Be carefull as the power button is not held in place and will come come off along with the metal edge. |
|---|---|
| + | [* black] Use the files to remove a very small amount of the material in the hole around the power button. |
| + | [* black] place the power button back in the hole and place the metal edge back on the device. Test that the button give a slight "click" when pushed before reassmebling the device. |