跳到步骤＃2
由 emil haurum — 编辑
编辑已通过 由 emil haurum
- 之前
- 之后
- 不变
步骤行
| + | [* orange] ++Very carefully slice through++ the adhesive in the pink box and undo the connector, this is the connector to the battery. |
|---|---|
| + | [* icon_caution] You will be cutting close to a ribon cable so ++be very careful.++ |
| + | [* orange] Start by removing the two silver screws in the orange boxes. |
| + | [* orange] Slide the metal edge back before undoing the two black screws in the orange circles. |
| + | [* blue] Remove the two silver screws in the blue circles. |
| + | [* green] Remove all the screws in the green circles. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加