跳到步骤＃1
由 Kristen Gismondi — 编辑
编辑已通过 由 Kristen Gismondi
- 之前
- 之后
- 不变
步骤行
| + | [* icon_caution] Make sure the laptop is powered off and unplug all cables before beginning any repair. |
|---|---|
| + | [* black] Flip your laptop over and place on a flat surface so you can access the screws on the base cover. |
| + | [* red] Remove the six 7 mm screws from the back panel of the laptop using a Phillips #0 screwdriver. |
| + | [* orange] Remove the four 4 mm screws from the bottom edge of the laptop using a Phillips #0 screwdriver. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加