跳到步骤＃11
由 Sandra Hiller — 编辑
编辑已通过 由 Sandra Hiller
- 之前
- 之后
- 不变
步骤行
| + | [* black] Fix the new battery on foam and in the centre of the position marked by a white line. |
|---|---|
| + | [* black] Carefully put everything back into position. Re-solder power connector, if it had to be de-soldered before. Fix it back into the round hole. |
| + | [* black] Close the case with the clip 1. The black and silver case can best be fixed with some transparent tape around the case. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加