跳到步骤＃1
由 Sam Goldheart — 编辑
编辑已通过 由 Sam Goldheart
- 之前
- 之后
- 不变
步骤行
| - | [* icon_note] The rear plastic cover is the point of entry for the 7th generation Nano. |
|---|---|
| - | [* black] Carefully lay the iOpener over the plastic tab to loosen the adhesive. Let the bag sit on the device for approximately 90 seconds before attempting to open the panel. |
| + | [* black] Lay the iOpener over the plastic tab to loosen the adhesive. Let the bag sit on the device for approximately 90 seconds before attempting to open the panel. |