跳到步骤＃1
由 Sarah Westberg — 编辑
编辑已通过 由 Sarah Westberg
- 之前
- 之后
- 不变
步骤行
| - | [* black] You will see a piece of plastic covering the RAM. You can flip it to the other side to reveal the RAM. Do not pull the plastic cover. |
|---|---|
| - | [* black] You will see both RAM sticks that you will need to remove by pulling back the socket holders on the sides of the RAM sticks, and pulling the RAMS sticks out. |
| - | [* black] Before you install your new RAM sticks, make your they match in Gigabit size and brand. If they aren't, the sticks wouldn't be able to reach their peak performance. |
| - | [* black] Tip: Align your new RAM sticks on to the sockets when installing them to prevent any damage to the pins below. |
| + | [* black] Flip the plastic cover over to reveal the RAM stick. Do not pull the plastic cover off. |
| + | [* black] Pull the two RAM retaining arms away from the center of the RAM stick. |
| + | [* icon_note] The RAM stick should "pop" up slightly from its socket. |
| + | [* black] Pull the RAM stick out of the socket. Repeat for each of the RAM sticks you are replacing. |
| + | [* icon_reminder] Align your new RAM sticks on to the sockets when installing them to prevent any damage to the pins below. |