跳到步骤＃4
由 Sarah Westberg — 编辑
编辑已通过 由 Sarah Westberg
- 之前
- 之后
- 不变
步骤行
| - | [* black] Locate the off-white ribbon connecting the LCD to the motherboard. |
|---|---|
| - | [* black] Lift the thin black Zero Insertion Force connector (ZIF) so the LCD screen can be disconnected. |
| + | [* red] Gently flip the LCD over to reveal a ribbon cable connected to the motherboard. |
| + | [* black] Use the tip of a spudger or your fingernail to flip up the small locking flap of the ZIF connector. Then, you can safely pull the cable out. |
| + | [* black] Remove the LCD screen from the camera. |