跳到步骤＃8
由 Manuel Haeussermann — 编辑
编辑已通过 由 Manuel Haeussermann
- 之前
- 之后
- 不变
步骤行
| - | [* black] Insert your opening tool between the |
|---|---|
| - | [* black] Slide the opening tool along the right edge and pry to release the plastic clips. |
| + | [* black] Insert your opening tool into the seam between the two housings on the controller’s right edge. |
| + | [* black] Slide the opening tool along the right edge and pry up intermittently to release the plastic clips. |