跳到这一步
由 Walter Galan — 编辑
- 之前
- 之后
- 不变
步骤行
| + | [* icon_note] This step is only required if you have a MacBook Pro 15" Unibody Model A1286. |
|---|---|
| + | [* red] Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case. |
| + | [* black] One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit. |
| + | [* black] Lift the AirPort board/cable retainer assembly out of the upper case. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加