跳到步骤＃3
由 Antonio Franco — 编辑
编辑已通过 由 Antonio Franco
- 之前
- 之后
- 不变
步骤行
| + | [* black] Remove the two screws holding down the system board |
|---|---|
| + | [* red] One screw is located above the RAM slot to the right |
| + | [* orange] Another screw is located next to the I/O cable near the edge on the left |
| + | [* yellow] By then, you can now lift the system board upwards. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加