跳到步骤＃3
由 Antonio Franco — 编辑
编辑已通过 由 Antonio Franco
- 之前
- 之后
- 不变
步骤行
| [* black] Start from the edge with the hinges. | |
| - | [* icon_caution] Do not start from the |
| - | [* black] Carefully pry the base cover using a plastic pick |
| - | [* icon_note] For efficiency, the |
| + | [* icon_caution] Do not start from the speaker end of the edges when opening, or you may cause further damage to your device! |
| + | [* black] Carefully pry the base cover using a plastic pick in the crevice near the hinges. Guide the pick along the edges and slightly lift upwards as you go along. |
| + | [* icon_note] For efficiency, use the triangular pick or other thin plastic scribe. |