跳转到主内容

跳到步骤#3

Delia Padilla编辑

编辑已通过 由 Delia Padilla

之前
之后
不变

步骤行

[* black] Start from the edge with the hinges.
[* icon_caution] Do not start from the Speaker end of the edges when opening, or you may cause further damage to your device!
-[* black] Carefully lodge a plastic pick into the crevice between the Bottom Shell and the rest of the device. Guide the pick along the edges and slightly lift upwards.
-[* icon_note] For efficiency, the Triangular Pick, or other thin plastic chip smoothly runs along the edges.
+[* black] Carefully pry the base cover using a plastic pick, in the crevice near the hinges. Guide the pick along the edges and slightly lift upwards as you go along.
+[* icon_note] For efficiency, the Triangular Pick, or other thin plastic scribe.