跳转到主内容

跳到步骤#2

Delia Padilla编辑

编辑已通过 由 Delia Padilla

之前
之后
不变

步骤行

-[* black] Do flip the device over to press and hold the power button for a few seconds to discharge any leftover electrical current. You may leave the screen open if further repair is needed, or close it if you are only replacing the battery.
-[* black] Flip the device back to the underside. Remove 5 M2x3 screws securing the battery to the device. Usage of the Philips 0 is recommended.
+[* black] Flip the device over. Press and hold the power button for a few seconds to discharge any leftover electrical current. You may leave the screen open if further repair is needed, or close it if you are only replacing the battery.
+[* black] Flip the device back to the underside. Using a Philips #0 screwdriver, remove five M2x3 screws that are securing the battery to the device.
[* black] ***Dell's official service manual does not mention of the 5th screw located near the middle edge of the battery closer to the touchpad!***
-[* black] From this point forward, you may now lift the battery upwards and proceed to follow the instructions in reverse order to proceed with replacement. If further repair is needed, proceed to [Next guide to be uploaded]
+[* black] Lift the battery upwards to remove it completely. Follow the instructions in reverse order to proceed with replacement. If further repair is needed, proceed to [Next guide to be uploaded]