跳到步骤＃3
由 Alex Diaz-Kokaisl — 编辑
编辑已通过 由 Alex Diaz-Kokaisl
- 之前
- 之后
- 不变
步骤行
| + | [title] Anti-Clamp instructions |
|---|---|
| + | [* icon_note] The next two steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down two steps for an alternate method.*** |
| + | [* icon_note] For complete instructions on how to use the Anti-Clamp, [guide|152309|check out this guide|new_window=true]. |
| + | [* black] Pull the blue handle towards the hinge to disengage opening mode. |
| + | [* black] Elevate the iPad enough for the Anti-Clamp's hinges to rest above and below the screen. |
| + | [* black] Position the suction cups near the left edge of the screen—one on the front, and one on the back. |
| + | [* black] Push down on the cups to apply suction to the desired area. |
| + | [* icon_note] If you find that the surface of your device is too slippery for the Anti-Clamp to hold onto, you can use packing tape to create a grippier surface. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加