跳到步骤＃4
由 Alex Diaz-Kokaisl — 编辑
编辑已通过 由 Alex Diaz-Kokaisl
- 之前
- 之后
- 不变
步骤行
| + | [title] Battery connector information |
|---|---|
| + | [* icon_note] These photos show what the battery connector looks like underneath the logic board. Use these photos as a reference while you safely disconnect the battery. |
| + | [* icon_note] Notice that the battery connector has cantilever springs on the logic board that press against the battery contact pads. Since both the logic board and battery are glued down, you'll need to slide something thin and flexible between the contact points to disconnect the battery. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加