跳到步骤＃4
由 Jamie Lira — 编辑
编辑已通过 由 Jamie Lira
- 之前
- 之后
- 不变
步骤行
| + | [* icon_note] Analyze the memory slots |
|---|---|
| + | [* red] Notice that the slots have this small module in the middle of the slot. |
| + | [* orange] Grab the new RAM sticks that you want to switch in. You must look at how the stick appears, that space gap in the bottom of the bar to connect to the module. You must line up the stick and the module. |
| + | [* black] After lining up the RAM stick to the module and slot, push the stick down to insert the RAM into its place and module. When properly inserted, you will hear a click; this notifies you that the stick was inserted correctly, and the latch will automatically close to hold the RAM stick in place. Repeat this step for the second stick. |
| + | [* icon_caution] When inserting the RAM, do not push down too hard. Considering the sticks are fragile, too much force can break the RAM stick. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加