跳到步骤＃2
由 Jamie Lira — 编辑
编辑已通过 由 Jamie Lira
- 之前
- 之后
- 不变
步骤行
| - | [* red] Once the computer is in an open and flat space to work on, place the computer upside and remove the screws holding the plate. |
|---|---|
| + | [* red] Once the computer is in an open and flat space to work on, place the computer upside and remove the screws that being the computer holding the plate. |
| [* black] After removing the screws, slide the plate from right to left to open the computer and see its machinery. | |
| [* black] After placing the plate somewhere else to keep the clear area, set the computer down on its side, where the open side is up for you to work on. | |
| [* orange] Locate where the RAM is placed. RAM looks like long thin pieces of hardware that look like small rulers and are placed next to each other. | |
| + | [* icon_note] From here on out, you should have your flashlight to shine light on your computer so you can see the hardware. |