跳到步骤＃3
由 Simeon Brankov — 编辑
编辑已通过 由 Simeon Brankov
- 之前
- 之后
- 不变
步骤行
| + | [title] Changing the thermal paste |
|---|---|
| + | [* black] Unscrew the 5 screws holding the CPU cooler. Disconnect the fan cable by releasing the latch on the connector and pulling the cable out. |
| + | [* black] Clean the old thermal paste both from the cooler and the CPU. It is best to use isopropyl alcohol and cotton buds or paper towel, but be careful not to go too hard on the CPU |
| + | [* black] Once you removed the old thermal paste its time to apply new one. |
| + | [* black] Dont use too much thermal paste, just enough to cover some portion of the pad. If you have a spreader, use it. The thermal paste will apply evenly after you tighten the heatsink. |
| + | [* black] Last, put the heatsink back carefully and tighten the screws in order 1 -> 5 to ensure even pressure. Dont forget to plug in the fan cable. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加