跳到步骤＃5
由 Liam Kandell — 编辑
编辑已通过 由 Liam Kandell
- 之前
- 之后
- 不变
步骤行
| - | [title] |
|---|---|
| - | [* black] With the rubber receivers removed, |
| + | [title] Body Screws |
| + | [* black] With the rubber receivers removed, six T10 screws hold the metal core of the device to the back plastic/fabric enclosure cover. |
| [* red] Using a T10 driver, remove the six screws (four were under the rubber receivers + the two screws at the top) |