跳到步骤＃5
由 BoulderMaker — 编辑
编辑已通过 由 BoulderMaker
- 之前
- 之后
- 不变
步骤行
| [title] Remove the Six Body Screws | |
| - | [* black] With the rubber receivers removed, there are six T10 screws that hold the |
| + | [* black] With the rubber receivers removed, there are six T10 screws that hold the metal core of the device to the back plastic/fabric enclosure cover. |
| [* black] Using a T10 driver, remove the six screws (four were under the rubber receivers + the two screws at the top) |