跳到步骤＃2
由 Liam Kandell — 编辑
编辑已通过 由 Liam Kandell
- 之前
- 之后
- 不变
步骤行
| - | [title] Light Board |
|---|---|
| + | [title] Light Board Removal |
| [* black] Fastened to the aluminium body with two T6 screws is the LED light bar. | |
| [* black] Using tweezers or pliers, gently disconnect the flex cable from the light bar. Be sure to pull on the plastic tab as this cable is very delicate. | |
| [* black] Using a standard T6 driver, remove the two screws and remove the light board. |