跳到步骤＃1
由 Kylie Freese — 编辑
编辑已通过 由 Kylie Freese
- 之前
- 之后
- 不变
步骤行
| [* black] Make sure computer is off before you begin. | |
| - | [* black] Start by removing base cover by unscrewing the screws labeled in circles using a Philips screwdriver. |
| - | [* black] Then loosen the captive screws from base cover indicated by squares. |
| + | [* black] Start by removing base cover by unscrewing the screws labeled in circles using a Philips J00 screwdriver. |
| + | [* black] Then loosen the captive screws from base cover indicated by squares with a Philips J00 screwdriver. |